New IEM Collaboration between Tripowin & HBB

  • 10mm High Performance Dynamic Driver with Cavity
  • Carbon Nanotube (CNT) Diaphragm Material
  • New IEM Collaboration between Tripowin & HBB
  • High Quality Build Materials: Aluminum Alloy & Resin
  • Detachable 2-Pin Cable
  • NOTE: Faceplate designs may differ due to the material used
Regular price $99.00 USD
Sale price $99.00 USD Regular price

Tripowin has partnered with one of the legendary audio reviewers in the audiophile world, “Bad Guy, Good Audio Reviews” (also known as Hawaiian Bad Boy), to develop the next ultra-performance, budget in-ear monitor that will shake the market.

Tripowin has been producing some of the most popular audio products for international brands for years, and this technological know-how, combined with HBB’s years of experience with thousands of HiFi audio products, first introduced the Mele. The Mele was beloved by the audio community and set a new benchmark in its category. Now, we bring the next iteration in our partnership - the Olina.

Tried and True: the Carbon Nanotube Diaphragm

The Olina utilizes one of the best diaphragm designs that have been praised in some of the best in-ear monitors of all time. The 10mm carbon nanotube (CNT) diaphragm utilizes an integrative network of carbon tube structures and is considered one of the strongest and stiffest materials in regards to tensile strength and elastic modulus. Previous IEM’s that have used preceding generation of CNT diaphragms were often considered the best tuned and performing monitors. Now, we have obtained the latest generation of CNT diaphragm designs that improves the membrane speed and thereby transient attacks and perceived audio definition.

Monitor Tuning

The Olina is tuned using an acoustic cavity rather than standard rubber sound tubing. This eliminates unwanted harmonic resonance while allowing the sound to seem more life-like and spacious. With a strong and clean bass shelf that resolves into a natural mid section, the Olina is perfect for those looking for a balanced monitor. The pinna gain is matched perfectly to that of the natural ear’s, and the treble is tuned to rescind naturally, while maintaining high detail retrieval and air. The Olina is a combination of one of the world’s best dynamic drivers and most precise tuning. 

Aluminum Housing

To precisely obtain the acoustic chamber design, the Olina is constructed from solid aviation-grade aluminum that is precisely CNC’d to deliver its specific sonic properties. The Olina is durable as it is accurate as an audio reproduction instrument. 

Premium Detachable Cable

The Olina comes standard with an upgraded 4-core OCC copper cable. Using a 2-pin connector, the cable is interchangeable, allowing the user to mix and match the cable, as well as ensuring the longevity of the IEM. 

Inside the Box

  • Olina Earphones
  • 2-Pin 0.78mm to 3.5mm 1.2 meter Cable
  • Replacement Filters
  • 6 Pairs of Eartips
  • Warranty Information
  • Storage Case

1 Year Warranty

The TRIPOWIN X HBB Olina Comes with a 1 year warranty on the In-Ear Monitors and 3 month warranty on the cable.

Technical Details

Brand & Model
Tripowin X HBB Olina
10mm High Performance Dynamic Driver with Cavity
Max RatedPower
Diaphragm Material
Carbon Nanotube (CNT)
110dB/mW @1KHz
Frequency response range
< 0.2%@1KHz
Earphone Material
Aluminum Alloy & Resin
Cable Interface
Detachable 0.78mm 2Pin
Plug Type

Authentic Products

Linsoul Audio is the authorized distributor. All products are authentic and genuine.

Worldwide Free Shipping

We are located in China but send our products worldwide for free. T&Cs apply.

1 Year Warranty

We provide 1 year warranty for the all products except the cables and accessories*.

Online Support

Need help?, we are here to assist you
Monday - Friday: 09:00 – 18:00 (UTC+8)

Customer Reviews

Based on 24 reviews
Sounds good but

These fit and sound pretty good, however the angle of the connectors are wrong so its hard for the wire to stay behind your ear. As a result you will have to bend the connector so it tucks more closely to your head and/or remold the wire so it tucks behind your ear better. As it stands the connector and the wire stick out about an inch from your ear and never stays put.

Hello there,

We're glad to hear that you've found the fit and sound quality of the earphones to be satisfactory and we apologize for any inconvenience you've encountered.

These aspects you mentioned can vary among users and may require personalized adjustments. We sincerely hope for your understanding of this aspect.However,we noticed that you mentioned that the angle of the connector is wrong, it would be most appreciated if you could provide a photo showing the problem you describe so that we can judge the problem more fully.We have sent you an email to gather more details.

We also appreciate your feedback as we strive to provide our customers with a better product experience.

Thanks for your support.

Julián Fernández




It is unfortunate.

It is a shame because the IEMs where honestly pretty good, for about 5 months after that the right IEM began to sound quieter. I did contact the waranty service but the shipment was expensive and the repair had a long waiting time so it was not wortith for me. In summary i cant recomend a product that failed me in less than a year of pretty light use.

Kelvin Ernesto Santiago Alberto


Horrible Customer Service from Linsoul

Ordered these a while back, and most recently the left side of the driver was showing signs of driver flex or slightly muted compared to the right side, upon consulting with the Linsoul team I paid and sent the IEM back for repair and was told they would repair and send it back to me, upon checking they opened it up and found some holes and claim that I was the one that made holes on the inside when I have never opened an IEM in my life and still do not know how to do so, they are now also asking me to pay for shipping. Proper money hoarders and please do not order from this site if you have to deal with this horrible after sales service

Hello there. Thank you for the feedback.

According to the manufacturer, the low frequency of the FR graph is abnormal. After removing the earbud, the driver has been tested to be normal. It was found that some holes were pierced in the piece of material circled in red (in the image attached to you via e-mail).

One does not need to open up the earbud to pierce holes into the piece of material. Using a small and sharp object such as a needle can easily do so (as attached in the e-mail as well). Therefore, the manufacturer informed us that the 'faulty' IEM is not a result of a manufacturing issue.

We do not know the cause of the hole-piercing. However, in the end, our Team still agreed to cover the return shipping and send you back the repaired IEM.

Harold Barrow
sweet sounds

I'm new to the IEM game and I get all my recommendations from Crinacle rating list and so far so good.

Rather Yes - good MOD found

Moondrop Spring Tips is the solution for the Olina's shouty treble. These tips remove ringing from mid/high frequencies. Comletely!
Still there is a problem with loose 2-pin female connectors and too simple shell shape - nothing to secure the fit. 4/5

They're OK

Really good technical performance, Ok tuning, top end can get a bit fatiguing after extended listens. Cable is a bit disappointing though.

rather not

These are IEMs with great technicalities and resolution for the money. But due to a bad tuning and connectors, Olina does not worth it.
- Bad 2-pin male connectors. The cable still falls out.
- Shouty treble on higher volume - no good MOD found so far
- Too simple shell shape. They fall out of the ear.

Shipping Policy

Which countries do you ship to?

How much does shipping cost?

How long does it take to receive the order after it is placed?

What happens if the parcel has been shipped but not delivered?

Who will pay for the import tax/custom fees

What shipping companies do you use?

Customer Support

How do I get help for my order?

Do I get tracking details for my order?

How do I cancel my order?

30-Day Return Policy

Where should I send the product for the return process?

When must the product be returned after receiving the RMA form and details? 

When will I receive my refund after returning the product?